Device Interface - Vital Signs

The following is referring to a Welch Allyn Spot Vital Signs monitor system. Contact your MIE Implementer to see if your vision system model can be interfaced or quoted.

Vital Signs

  • Open WebChart .
  • Pull up the correct patient.
  • Add encounter for patient or add vitals by choosing the Vitals chart tab
  • Once Encounter has been added scroll down to Vitals section or enter in via Vitals chart tab. Make sure device mode is selected.

  • Select the Get readings button in WebChart

    • Vital signs will appear on page.
  • Select the add button for the correct set of vitals. (Note: if the device is being kept clean your results should be the only ones listed)

  • Select and submit button and vital signs will be saved to the encounter and appear on page.

  • Select the Clear Device button.

  • Scroll to the bottom of the page and select submit to save vital signs to chart.

  • Please note that for metrics the process above is the preferred method for entering vital signs

  • Take patient’s vital signs.

  • Select the Get readings button.
    • Vital signs will appear on page.
  • Select the add button for the correct set of vitals. (Note: if the device is being kept clean your results should be the only ones listed)
  • Select clear device and submit button
  • Vital signs will be saved to the encounter or Vitals chart tab and appear on page.
WebChart Documentation
Last Build: Wed, 08 Sep 2021 00:25:59 EDT Legacy Documentation